Stryfe - Stage 1 DIY Wiring & Switch Kit
STF-WK1
$15.00 inc. tax
Battery Connector*
Stryfe - Stage 1 DIY Wiring & Switch Kit Summary

Stryfe - Stage 1 DIY Wiring & Switch Kit

STAGE 1 DIY Wiring & Switch Kit: Release the potential of you blaster!  Shoot harder and faster with this wiring and switch DIY kit.  This kit includes all the low resistance 18AWG wire you need for one blaster, upgraded acceleration/rev switch and battery connector of your choice.  Kit is supply only of individual components.

Stage 1 will complement those who are competent with electrical circuits and soldering.

The kit will contain the following:
  • All the 18AWG wire you will need for one blaster
  • Heat Shrink Tubing
  • Upgraded acceleration rev switch
  • Rubber grommet 
  • XT60 connector or Deans connector for battery connection
With this kit installed, depending on motors used, expect increases of 15FPS muzzle velocity (stock motors) to 40FPS muzzle velocity (Xtreme Pro 180's) with with LiPo battery pack.  (stock Stryfe 60-70FPS muzzle velocity).  (Testing performed in a controlled scenario with brand new Elite darts)

Click here for installation instructions: Stryfe Installation Guide Stage 1
Click here for circuit diagram: Stryfe Circuit Diagram
LiPo low voltage alarm: Low Voltage Alarm
Recommended battery pack 3S LiPo: 3S LiPo Battery Pack (Use with Battery Tray Expander, sold separately)
Recommended battery pack 2S LiPo: 2S LiPo Battery Pack (Use with Battery Tray Expander, sold separately)
Recommended battery charger: Battery Charger You will need to purchase battery charger power supply, as well as female Deans to male XT60 adaptor Deans XT60 connector

Battery tray expander sold separately.  Stryfe Battery Tray Expander
180 motor cover sold separately (if using 180 sized motors).  Stryfe 180 Motor Cover
We recommend using Worker Flywheels sold separately.  Worker Lightweight Flywheels

Important Safety
Blasters are modified at your own risk.  BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster.  BlasterTECH will not accept any liability for injury caused during or after modification.  The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older.  Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
70
Product Condition:
New
Customer Reviews
(write review)
5/5
Great motors
I just recently bought these and boy, did they arrive in the US pretty fast. It took about 12 days for them to arrive and I was very happy. I put these motors into my Strayven (Stryfe with integrated Rayven shell) and they work very nice on 2s lipos (7.4 Volts). The first time I shot an 18 round dart magazine, I saw the darts weren't getting good range. So I opened up the blaster and went straight to the fly wheels. There was a blue residue from the darts all over the place from the darts melting. The Stryfe fly wheels were spinning too fast. So I took out the fly wheels and put in heavier Rayven fly wheels and now the darts are flying considerably farther without the darts melting. These motors are perfect for nerf wars and will hurt someone if you shoot them up close. This motor loom was easy to install, is very powerful, and is very fun. I would defiantly recommend these.
Product Added to your Cart
x

-------- OR --------