"Hurricane Flywheel Cage Package Deal" DIY kit.  Rated at 120fps with decent/fresh darts and 2s Lipo.  This Kit is aimed at being a safe, fully enclosed and robust system that works together with the stock wiring and switch, whilst providing space for a decent sized 1000mah lipo.

Make it one heck of a pistol!

Over $10 saving buying the components individually!

Includeds as follows (as shown in picture):
- Hurricane 34mm flywheel cage (inc motor screws)
- Hurricane Black Angled Flywheels
- 2x Honeybadger 2s motors
- Hurricane Grip Extension (Blue)
- XT60 connector
- Heat Shrink Tubing

Honeybadger motors are recomended due to dealing with smaller diameter flywheels.  Higher rpm is needed to have adequate surface speed at the outer circumference of the smaller wheel.  Honeybager being a 6v motor, with a 2s lipo the motor is overvolted resulting in increased rpm and therefore adequate wheel circumference speed.  A decent sized 2s Lipo can easily be stored in the grip with grip extension.

Performance 3d printed in PLA Flywheel/Motor Cage for the Worker Hurricane.  Features higher crush increased performance over stock cage, increased strength, less noise, less vibration, dart guide funnel for reliable dart feeding.  An enhanced 'no fuss' simplified flywheel/motor cage system.

Features:
- 34mm motor shaft to shaft (stock = 35mm) for increased dart crush and performance
- Strong and rigid 3d print
- Fluting cut out, provding ventilation space for vented motors 
- Flywheel removal holes

Recomended battery pack compatible with Hurricane blaster and grip extension.  (not included in package deal): 1000mah 2s Lipo

Flywheel cage package deal comes complete with: Hurricane 34mm flywheel cage (inc motor screws), Hurricane Black Angled Flywheels, 2x Honeybadger 2s motors, Hurricane Grip Extension, XT60 connector, Heat Shrink Tubing.

This product is designed, tested, printed / stocked in house and can be dispatched ASAP.

Avoid leaving this product in hot conditions (eg in the car) as it will affect the plastic strength.

NOTE: Listing is for a Hurricane Flywheel/Motor Cage and Motor Fixing screws only, blasters and accessories are for display purposes only.



Important Safety
Blasters are modified at your own risk.  BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster.  BlasterTECH will not accept any liability for injury caused during or after modification.  The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older.  Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face.  Always use foam darts.  By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.