Mini Voltmeter perfect for our Blasters! Very small in size. Read your voltage the fly! Don't get caught out draining your Battery Pack and possibly damaging it. A very neat addition to your blaster. Wire up to monitor your battery voltage, it is advised to use on a switching basis (so it is not constantly illuminated). Either use a separate switch or if you have done a rewire in your blaster, use the now redundant jam door switch so the voltmeter only illuminates when you 'open' the jam door. Simply cut a hole in your blaster the size of the voltmeter, fit and glue in place.
Dimensions = L=23mm, W=10mm, D=9mm
Voltage Range = 2.5V - 30V (do not use with 30V+)
Current Draw = <30mA
Accuracy = 00.0V
NOTE: Listing is for the Mini Voltmeter only, blasters and accessories are for display purposes only.
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18 years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.