Smoothies from Worker!  Workers only smooth flywheels.  These wheels were designed to be compatible with Worker Flywheel Cages as well as just about every other aftermarket cage out there, to be as much dart encompasing as possible - for increased surface area on dart and improved velocities.  The smooth surface rather than groved/ribbed ensures decrease wear and tear on darts.  These flywheels will not work in Canted type Flywheel Cages.

W0403 Plastic - Acetal 
Inner (root) Diameter: 34.5mm
Outer Diameter: 36.2mm
Weight: 5.67g

Sold as a set/pair (2x flywheels).

Please note.  These Rapidstrike/Stryfe flywheels are compatible Worker Flywheel Cages and all OFP (Open Flywheel Project) cages for all blasters.

When installing/pushing flywheels on to motor shaft, ensure (see photos):

-Middle of flywheel is supported (pushing on outside of wheel will break it)

-Bottom of motor is supported

-Wheels are not pushed on too far as to rub against cage (its much easier to push wheels on and very hard to pull back off)  (Wheel rubbing on cage will cause component failure ie motor burn out)

-Once installed use fingers to ensure wheels spin freely and there is no friction/rubbing

- 'Multigrip Pliers' are an excellent tool for flywheel installation


Important Safety
Blasters are modified at your own risk.  BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster.  BlasterTECH will not accept any liability for injury caused during or after modification.  The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older.  Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts.  By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.