'Daybreak' Ultra Performance, Affordable/cost effective 3d printed solution.  Flywheel cage and Flywheels from Daybreak.  Amazing innovation, extreme high end flywheel cage and flywheels for high performance needs.  130, 180 motor compatible.

Please select from the pull down menu the combination you would like:  41mm or 40mm motor spacing.  With or without flywheels. 

This 40/41mm Daybreak Flywheel Cage and Daybreak Flywheels are to be used in conjuction with each other.  Other brand flywheels are not compatible and therefore not to be used with Daybreak Flywheel Cages.

Peformance:
41mm cage setting.  140-150fps (ball park figure - variables considered) with decent motors etc 
40mm cage setting.  160-170fps (ball park figure - variables considered) with decent motors etc 
(with appropriate electrical upgrades, motors, wiring, LiPo, etc)

We recomend using soft tipped darts with this high crush cage/wheel system.  Do not use hard tipped darts FVJ, Voberry type darts.  These darts are very hard to compress and will cause failure.

Flywheel Plastic - Acetal 
Inner Diameter: 31.7mm
Outer Diameter: 38mm
Weight: 7.19g

Daybreak cage/wheel system comes complete with the following
- 1x 3d printed Flywheel/Motor Cage (either 40mm or 41mm motor spacing)
- 4x Motor fixing screws
- Set/Pair Flywheels
- Inbulit Dart Entry Guides

Actual colour may vary from image shown.

Some handy points:
- Use your existing cage to blaster shell screws.
- Its is advsable to use thread locker on cage/motor screws to ensure they do not come loose from vibration

BlasterTECH have purchased the 3d models from Daybreak to manufacture and sell this product.  These designs are the latest version models that are not available to the general public.  This product is printed / stocked in house and can be dispatched ASAP.

Avoid leaving this product in hot conditions (eg in the car) as it will affect the plastic strength.

NOTE: Listing is for a Daybreak Rayven Flywheel/Motor Cage/Wheels and Motor Fixing screws only, blasters and accessories are for display purposes only.

Important Safety
Blasters are modified at your own risk.  BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster.  BlasterTECH will not accept any liability for injury caused during or after modification.  The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older.  Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face.  Always use foam darts.  By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.