AED
AFN
ALL
AMD
ANG
AOA
ARS
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BYR
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GBP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRO
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XOF
XPF
YER
ZAR
ZMW
ZWL
Default Language Pack (us-en)
Caliburn Worker Blaster Kit
Designed by Captain Slug. This is a Worker/F10555 product, produced in partnership with Captain Slug.
The Worker Caliburn is a high performace spring powered blaster that accepts both full length (standard) and half length (stefans) darts.
This is not a toy, it is a high performance, quality 3d printed, strong and durable hobby grade foam dart blaster. Using the hardware provided and a few tweaks with the o-ring seals, averages 240-250fps depending on darts, lubrication and other variables.
This Caliburn Kit comes with stronger Pollycarbonate Magwell incuded!!! (3d printed one shown in photos). Also includes metal pusher and plastic spring guide which are obviously much better/stronger than 3d printed parts.
This kit is a DIY blaster. Includeds 3d printed parts and hardware parts. Comes in kit form, assembly is required (Installation instructions are included in kit). Please do not overtighten plastic parts as they may crack or fail.
Available in Blue/White as pictured.
Not suitable for children due to high power and strong prime weight. Always wear safety glasses when using blasters and play responsibly.
Due to international shipping costs and international customs restrictions, this item is only available to Australian residents/addresses.
Note: Listing is for Worker Caliburn Blaster Kit only. Does not include darts or magazine, but are required.
Visual Installation guide:
Important Safety
Blasters are used at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use approved foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
The Worker Caliburn is a high performace spring powered blaster that accepts both full length (standard) and half length (stefans) darts.
This is not a toy, it is a high performance, quality 3d printed, strong and durable hobby grade foam dart blaster. Using the hardware provided and a few tweaks with the o-ring seals, averages 240-250fps depending on darts, lubrication and other variables.
This Caliburn Kit comes with stronger Pollycarbonate Magwell incuded!!! (3d printed one shown in photos). Also includes metal pusher and plastic spring guide which are obviously much better/stronger than 3d printed parts.
This kit is a DIY blaster. Includeds 3d printed parts and hardware parts. Comes in kit form, assembly is required (Installation instructions are included in kit). Please do not overtighten plastic parts as they may crack or fail.
Available in Blue/White as pictured.
Not suitable for children due to high power and strong prime weight. Always wear safety glasses when using blasters and play responsibly.
Due to international shipping costs and international customs restrictions, this item is only available to Australian residents/addresses.
Note: Listing is for Worker Caliburn Blaster Kit only. Does not include darts or magazine, but are required.
Visual Installation guide:
Important Safety
Blasters are used at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use approved foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
1400.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
(write review)
5/5
Amazing Blaster!
I recently got this blaster, and it is amazing. Once fully assembled, the blaster fires successfully without any issues. Additionally, the customer support is next level! Dean responded to any questions I had within the hour and always provided detailed answers that fixed any problem I was experiencing. Overall, I 10/10 recommend this company and blaster to anyone who is into nerf.
5/5
A Serious Enthusiasts Blaster
If you want a serious blaster but want near infinite customisation this may well be your blaster. The injection moulded mag-well makes for a solid base for the 3d printed parts. The printed parts all look good and required minimal clean up to make fit nicely, with the exception of the small holes for some of the friction pins that just needed a touch to make the pins fit well. The included instructions could have been clearer in places, but with the video here and Capt. Slugs guides the build was pretty straight forward. Of course if you have a 3d printer the possibilities for modifying this kit are almost endless. I have stuck Capt. Slug's V2 SCAR on along with some printed open sights and it is phenomenal
5/5
A Serious Enthusiasts Blaster
If you want a serious blaster but want near infinite customisation this may well be your blaster. The injection moulded mag-well makes for a solid base for the 3d printed parts. The printed parts all look good and required minimal clean up to make fit nicely, with the exception of the small holes for some of the friction pins that just needed a touch to make the pins fit well. The included instructions could have been clearer in places, but with the video here and Capt. Slugs guides the build was pretty straight forward. Of course if you have a 3d printer the possibilities for modifying this kit are almost endless. I have stuck Capt. Slug's V2 SCAR on along with some printed open sights and it is phenomenal